Sidewinder Suzuki Samurai CV Harley Carburetor Installation Kits

Rating:
0% of 100
$84.64
7 In Stock
SKU
Sidewinder CV Harley Carburetor Kits

The Sidewinder CV Carburetor kit for the Suzuki Samurai allows you to install the popular Keihin® 40mm CV (constant velocity) or the Screaming Eagle 44mm side draft carburetor on your stock or modified off-road vehicle. The performance and reliability of this carburetor is a matter of record, and with its float bowl below the venturi, the Keihin is very resistant to flooding or rough running when operating on steep inclines or angles. The constant velocity system smooths sudden throttle changes and also allows the Keihin CV to automatically alter A/F (Air/Fuel) ratios during elevation changes.

By far the easiest and most simple way of increasing the ponies from your Samurai Engine. CV Carburetors flow better, run on angles better and increase efficiency better than any carburetor available for the Samurai.

What makes this sidedraft carburetor kit different?  

  • The carburetor brackets allow for easy removal of the carburetor itself.
  • Carburetor sealing is ensured by using unique adapters for 40MM or 44MM Carburetors.
  • Better vibration resistance than competitors. 
  • Free flowing manifold machining.
  • Carburetors can be tuned for additional upgrades (Cam, Header, Internal Engine Upgrades)

Includes:

  • Brackets needed for installation of Carburetor to 1.3L 8V Carbureted Manifold
  • High Quality K&N Air Filter
  • Installation Hardware
  • Hoses and Hose Clamps
  • Adapter to Manifold Gasket
  • Valve Cover Filter
  • Proper Length Choke Cable and Knob

This kit  includes installation instructions and additional instructions on how to modify your supplied carburetor for optimum performance.

What Else Do You Need?

You will need to modify your throttle cable or purchase our modified cables from this page. 

Sidewinder Kits do not include a Carburetor.  You will need to source either a 40mm or 44mm Screamin" Eagle Carb.  

Here are Three Suggestions:

1) Purchase Direct From Sidewinder.

We now include with each 44mm kit a New Genuine Harley Davidson 44mm Screamin' Eagle Side Draft Carb (SEU-CV44) that is pre-modified for use on the 44mm Sidewinder Kit. This is the easiest way to go.  When you order both the carb and adapter kit together you will receive them ready to install.

3) Purchase a Used 40mm or 44mm

Many customers prefer the 40mm carb to the 44mm as it tends to be easier to adjust and more forgiving in altitude adjustments.  Unfortunately it is no longer available new.  Used 40mm carburetors must be manufactured between 1996-2006.  

If using an old carburetor please see the parts table below and make sure you have all the necessary choke parts.  Because these parts are included with new carburetors, we do not include them in the Sidewinder kit  but they can be purchased from Harley Davidson by requesting the part numbers listed below.

Please Note:Please Note: Carburetors need to be modified before installation.  You can do it yourself using our instructions.

 

When Using an Old Carburetor You May Need a Few Parts.

Parts to be purchased or supplied separately for 44MM Screaming Eagle Setup.

Part Description           

Part Number

Qty Needed

Cable Guide, XLH 883/1200

27580-88

1

Starter Cap, Carb, XL

27581-88

1

Cap, Cable Sealing, XLH883/1200

27582-88

1

Starter Valve, Carb, XL

27583-88

1

Spring, Enricher

27315-88A

1

                 

Please Note:  If you have a 40MM Adapter and want to upgrade to a 44MM later on, upgrade boots are available for purchase separately.

Includes:

  • Bracketry needed for installation of Carburetor to 1.3L 8V Carbureted Manifold.
  • High Quality K&N Air Filter.
  • Miscelaneous Hardware Needed for installation.
  • Hoses and Hose Clamps needed for Installation.
  • Adapter to Manifold Gasket
  • Valve Cover Filter.
  • Proper Length Choke Cable and Knob

  • 1986 Suzuki Samurai
  • 1987 Suzuki Samurai
  • 1988 Suzuki Samurai
  • 1989 Suzuki Samurai
  • 1990 Suzuki Samurai
  • 1991 Suzuki Samurai
  • 1992 Suzuki Samurai
  • 1993 Suzuki Samurai
  • 1994 Suzuki Samurai
  • 1995 Suzuki Samurai

Download installation instructions here.

Installation Instructions

All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.

Please read and review our return and warranty requirement document before sending in products.

Warranty Exclusions


Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.

Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.

Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.

All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.

    To begin your warranty claim:
  • Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
  • Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
    Ship all products to:
    ATTN: WARRANTY
    5356 E. Pine Avenue
    Fresno, CA 93727.
  • Please place a clearly marked copy of the original invoice inside the package.
  • Please include a short note stating the problem you are experiencing.

If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.

If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Copyright © 2023 Low Range Off-Road. All Rights Reserved.