Trail-Gear Rock Assault High Flow Hydraulic Reservoir & Filter Kit
Trail-Gear Rock Assault High Flow Hydraulic Reservoir & Filter Kit
Our original Rock Assault Hydraulic Reservoir and Filter Kit set a new standard for full hydraulic system reservoirs when we first introduced it. However, the fixed port locations on the ends, limited mounting options, and limited fitting sizes have not kept up with the needs of modern rock crawling & desert racing. We have addressed those concerns with our new Rock Assault High Flow Hydraulic Reservoir & Filter Kit.
Our Rock Assault High Flow Hydraulic Reservoir & Filter Kit retains the all the features you loved from the original version: large spin-on filter, quick-drain plug with magnet, reservoir cap with magnet, internal baffle, tapped mounting holes on the sides of the base, and high-quality O-rings. We increased the port size to -12 SAE, allowing more flow and the flexibility of using up to #12 JIC fitting sizes. We also added additional suction & discharge ports to each side of the base for flexibility in installing your hoses. ¼” thru holes have been added to the base to allow additional mounting options. ¼” & 5/16” mounting hardware is included. This reservoir will easily handle the needs of modern rock crawling & desert racing trucks and is ideal for buggies with rear-steer axles.
Choose the #6/#10 Fittings option for compatibility with all existing Trail-Gear Full Hydro steering kits.
Select the #8/#12 Fittings option for high-flow racing applications.
Additional fittings are sold separately (see Related Items below).
AVAILABLE OPTIONS:
TGI-312353 - Trail-Gear Rock Assault High Flow Hydraulic Reservoir & Filter Kit - #6-#10
TGI-312416 - Trail-Gear Rock Assault High Flow Hydraulic Reservoir & Filter Kit - #8-#12
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Compact design is ideal for full-hydraulic applications.
- Made from 6061-T6 aluminum and TIG-welded for leak-proof joints.
- Multiple suction & discharge ports allow greater flexibility for routing hydraulic hoses.
- (8) mounting thru-holes in top of base for ¼” long bolts (1/4” socket head bolts & nylock nuts included)
- (6) 5/16” tapped holes on either side of the reservoir base for mounting (5/16” hex bolts included).
- Compatible with all existing Trail-Gear full hydraulic steering kits (#6/#10 Fittings option only).
- Quick Drain Plug with magnet.
- Internal Anti-Slosh Baffle.
- -12 SAE Ports are Compatible with up to #12 JIC Fittings.
- Easy Change Spin-on Filter.
- Large Surface Area Acts as Heat Sink.
- Port Locations Offers Optimum Fluid Flow and reduces Areration.
- O-Ring Sealed System.
- Rated Up to 22 GPM - Keeps Steering Working Despite Extreme Vehicle Inclination.
- Supplied with (4) SAE port plugs and your choice of a #6 & #10 fitting or a #8 & #12 fitting.
- Additional fittings sold separately (see Related Items below).
Non-application Specific
If you have any questions on the use or installation of this product please contact our customer support at (559)-549-6737.
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Please read and review our return and warranty requirement document before sending in products.
Warranty Exclusions
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts that are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
Axle/Birfield/CV Joint Warranty Disclaimer
Axle and Birfield/CV joints are warranted by the Trail-Gear Family of Companies for mechanical failures (e.g. breakage) only to the original purchaser. Proof of purchase is required for all warranty claims. Trail-Gear Family of Companies reserves the right to deny any claim if the product is shown to be incorrectly installed or the subject of collateral damage of surrounding components. Trail-Gear Family of Companies is not responsible for any collateral damages to any components caused by or related to a Trail-Gear Family of Companies product. Trail-Gear Family of Companies is not responsible for any shop/labor hours related to the installation or replacement of Trail-Gear Family of Companies product.
All warranty claims are subject to review and acceptance at the sole discretion of the Trail-Gear Family of Companies and may require the return of parts at the customer's expense for warranty review. Parts that are rejected for warranty coverage will be shipped back to the customer at the customer’s expense or scrapped after 10 business days.
For Axle and Birfield/CV joints with Lifetime Warranty, Lifetime Warranty means one-time replacement within the lifetime of originally purchased product only to the original purchaser.
The warranty does not cover the following conditions:
- Normal wear and tear
- Noise
- Twisted shafts
- Twisted splines
- Bent axles
- Stripped threads
- Modification of the product
- Intentional or willful destruction of the product
- Failures from improper installation or storage
- Failures from other than the intended use
- Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer. Ship all products to:
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, CA 93727.
- Please place a clearly marked copy of the original invoice inside the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.
