Toyota Long Travel Spring Under Kit - 2.5-inch Wide Springs on 3-inch Axle

$150.00
Limited Stock!
SKU
RSS-R1119

Ruffstuff's Complete Spring Under kit has been a great success but some people wanted a more minimalist approach so here you are!

You will have to cut the Ubolts to fit the thickness of the springs you are using to keep the ends within the bottom cradle. The ubolts are for an 3.25" diameter axle (Ford 8.8, D60, 9", Etc. but they have been used to fit a 1986+ Toyota Rear Axle.) The bottom "Cradle" brackets are 1.75" deep and can protect the Ubolt threads from the dirt and rocks, just trim the ends after you install them. They are made 2.5" or 60mm wide in the spring area, only enough to allow a snug fit so if you lose the center pin it won't fall apart on you.

The perches are slightly wider to add stability and fully rest the spring under the perch.

Kit Includes:

2 Spring under leaf spring plates for 2.5 "wide springs

2 perches for 3" axle tube, 2.5" wide

4 U-bolts 10"x5/8"x3 1/4" and hardware.

-Works great with more arched springs like Deaver's springs or a 6" leaf spring in a spring under fashion.

This is a Do It Yourself (DIY) unwelded kit and comes with the pieces to complete 1 axle left and right sides.

Kit Includes:

  • 2 Spring under leaf spring plates for 2.5 "wide springs
  • 2 perches for 3" axle tube, 2.5" wide
  • 4 U-bolts 10"x5/8"x3 1/4" and hardware.

Universal - Fits any 3" Axle Tube

If you have any questions on the use or installation of this product please contact our customer support at (559)-549-6737

See manufacturer for details.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Copyright © 2021 Low Range Off-Road. All Rights Reserved.