2005-2015 Toyota Tacoma Bilstein Stage 2 6112 Series Kit, 1.0"-2.5" Lift by Low Range Off-Road
The ultimate entry level lift for Tacoma, this kit covers all the bases that you need so that everything runs well and reliable.
This kit is similar to our Stage 1.5 Bilistein lift kit but includes 6112 Series Bilstein struts.
Kit Includes :
- Front Bilstein Adjustable Shocks - 6112 Series 0-2.5" Lift
- 2" Add A Leaf Kit, Pair
- Differential Drop Kit
- OEM Style Metric Extended U-Bolts 216MM Long (8.5")
- Bilstein 5160 Rear Shock 0-1" Lift
- Stainless Steel Brake Line Kit - Front and Rear 2" Longer Than Stock
- Old Man Emu OME 2887 Coil Spring Pair
Old Man Emu OME Coil Springs (2887)
Old Man Emu coil springs enable the installer to match the most appropriate springs to the intended application. While ride height increases are attained, emphasis is placed on ride control improvements. Further fine tuning is achieved when the springs are matched to a corresponding set of Old Man Emu shock absorbers, delivering a fully integrated system, designed specifically to suit your vehicle. A 4WD equipped with this combination will exhibit better towing and load carrying characteristics, improved wheel travel, and will ride and handle better over any road surface.
- Springs are formed on precision mandrels
- Scragging before and after shot peening to prevent sagging
- Coil spring end configurations designed to exact specifications guaranteeing perfect fit to your vehicle
- Durable powder coat finish
Bilstein 6112 Series Front Adjustable Shocks 0-2.5" Lift - Assembled With OE Style Strut Mount (46-241627)
BILSTEIN 6112 Series
Designed for the serious off-road adventure seeker, the all-new BILSTEIN 6112 Series is the ultimate suspension solution. The 6112 Series optimizes off-road and on-road capabilities with a 60mm digressive piston for increased damping control. This kit features an adjustable spring seat which allows vehicle leveling, larger tires, and increased ground clearance. Kit includes (2) front 60mm shocks, (2) spring seats and (2) springs.
Features and Benefits:
- Large 60mm monotube for increased oil capacity, cooling, and long-term durability
- 60mm digressive piston for improved ride comfort and control over rough terrain
- Custom engineered cold wound linear springs for enhanced vehicle control
- Monotube design for consistent, fade-free performance
- Application specific for maximum performance
- Uses OEM top mount and rubber isolator
- Kit includes (2) front 60mm shocks, (2) spring seats and (2) springs
Assembled
Don't have Spring Compressor? Don't Sweat it. Low Range has you covered. We have all the tools to assemble it in house. No need to pull apart your old strut.
- Comes With New Factory Style OE Strut Mount's
- Compressed and ready to Go
- Choose from any of the selectable hights
- One less step to install on your Vehicle
- Priced so you can save Time and Money
Please Note : When Installing Springs on Strut, product may Succumb to minor Scuffs and Scratches when Installed in Spring Compressor.
Low Range Off-Road 2" Add-A-Leaf Kits for 2005-2020 Toyota Tacoma
These add a leafs are of the highest quality spring steel available today and are made in the USA with USA Steel. Unlike the many low quality springs on the market, these will not fail as soon as weight is placed on the vehicle.
While there are companies claiming to sell "SOFT RIDE" add-a-leafs, any leaf that is intended to lift a truck is going to increase your spring packs spring rate. Add-a-leafs that do not change your vehicles ride quality will neither provide the additional lift that this lift kit does nor will they last very long. These add-a-leafs are designed to have a minimal impact on ride quality while gaining a little weight carrying capacity for your overland adventures.
These give approximately 2" of lift and work on both "TSB"and "non-TSB" springs on 2005-2020 Toyota Tacoma.
Includes:
- 2 USA Made Add-A-Leafs, Yields approx. 2" Lift
- 2 High Strength Center Pins with nuts.
Anti-Friction Pads installed on add-a-leafs to reduce noise, vibration, and harshness.
2005-2016 Toyota Tacoma Differential Drop Kit (LR-2GDDK)
Low Range Off Road has designed a Differential Drop to keep those Constant Velocity Joint boots from tearing, and prevent premature wear of the CV joints due to the increased angle.
When too large of a spacer is used, the differential mounting points have large factory washers that will hit the bushing mount on the differential- Causing metal to metal contact. We like to keep everything like it was designed- no noises, no squeaks, no problems- So we came up with the perfect length.
The Skid Plate drop is no exception in quality. We don't include a bolt that wouldn't mimic factory quality. Why not include an "off the shelf bolt"? Simply put, when doing routine service, the bolts that are on the from the Factory are a 12mm head. Off the shelf metric bolts have a 13mm head....what the? Plus, the factory bolts make it easy to keep the bolt in a socket, unlike others for easy removal and installation. The bolt also has an extra large flange area to keep the bolt from sliding through the hole on the skidplate.
Included In Kit:
- 2-New USA Made Grade 8 Hardware on the Diff Drop Bolts for ultimate strength.
- 2-Grade 8 Hardened Washers
- 2-Serrated Flange Nuts on Diff Drop Bolts for Easy Installation. (Factory is Flanged)
- 2-Precision CNC Machined Differential Drop Spacers (Correct Length)
- 4-Precision CNC Machined Skidplate Drop Spacers
- 4-Flanged 12MM Head Grade 10.9 Extended Skidplate Drop Bolts
Made in USA
FITS 4WD MODELS ONLY (2WD MODELS DO NOT HAVE A FRONT DIFFERENTIAL)
OEM Style Metric Extended U-Bolts 216MM Long (8.5")
Installation is easy with Included U-bolt kit. We believe in using OEM quality fasteners whenever possible. Many competitors offer generic SAE U-bolts that never seem to fit just right. That is because Toyota U-bolt plates need metric U-bolts to sit correctly. We have noticed many aftermarket U-bolts have the wrong bend radius. These U-bolts will fit as though they came right from Toyota. We custom manufacture these in LARGE quantities so that we can pass the savings on to you. They are the same as the factory thread, and even come with NEW OEM U-bolt nuts.
Specs: 216MM Long measured inside the U-bolt bend to end of thread (8.5 Inches)
Can be trimmed to length.
5160 Series Rear Shock Kit - 0-2" Lift
This Rear Kit Includes 2 Rear Shocks
Rear Left - 25-242379
Rear Right - 25-242539
Bilstein's 5160 Series Reservoir Shocks are designed to easily install in the stock shock mounting location on pickups and SUVs, with no cutting or welding required. They utilize Bilstein's industry leading mono tube design for the ultimate in performance off-road and on. Other features include: Unique digressive valving system instantly produces full damping capability, Remote reservoir dramatically increases shock oil capacity for even greater heat dissipation and damping sensitivity, Reservoir mounting configuration designed specifically for each vehicle application, For increased wheel travel and more shaft movement, the “floating” dividing piston is located in the reservoir, Bilstein’s exclusive Triple-C Technology® finish provides easy care and lasting great looks, Includes reservoir mounting kit and detailed instructions.
Pair of 24" All-Pro Rear Brake Lines
No lift kit is complete without appropriate brake lines. These extended brake lines are the perfect length for your new 2" lift kit.
Fits: 2005-2015 Toyota Tacoma
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Kit Includes :
- Front Bilstein Adjustable Shocks - 6112 Series 0-2.5" Lift
- 2" Add A Leaf Kit, Pair
- Differential Drop Kit
- OEM Style Metric Extended U-Bolts 216MM Long (8.5")
- Bilstein 5160 Rear Shock 0-1" Lift
- Stainless Steel Brake Line Kit - Front and Rear 2" Longer Than Stock
- Old Man Emu OME 2887 Coil Spring Pair
- 2005 Toyota Tacoma
- 2006 Toyota Tacoma
- 2007 Toyota Tacoma
- 2008 Toyota Tacoma
- 2009 Toyota Tacoma
- 2010 Toyota Tacoma
- 2011 Toyota Tacoma
- 2012 Toyota Tacoma
- 2013 Toyota Tacoma
- 2014 Toyota Tacoma
- 2015 Toyota Tacoma
If you have any questions on the use or installation of this product please contact our customer support at (559)-549-6737
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Please read and review our return and warranty requirement document before sending in products.
Warranty Exclusions
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
- Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, CA 93727.
Ship all products to: - Please place a clearly marked copy of the original invoice inside the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.