Ultimate Toyota E-Locker Wiring Harness Kit by Low Range Off-Road
Ultimate Toyota E-Locker Wiring Harness Kit by Low Range Off-Road
Toyota locking axles are great choices for axle swaps. 8" E-locker differentials are strong and versatile. Wiring a Toyota E-locker differential to work outside of its donor vehicle is possible but not as simple as just splicing a few wires. DIY instructions for this modification have been published for decades. For years we had been selling sections of factory Toyota harnesses to be converted into universal harnesses. That process involved cutting and splicing the ends on-to six-lead trailer wire. Not only is trailer wire expensive, it isn't even the correct wire gauge. When added up, the cost of a DIY harness can easily surpass $150. Put simply, making your own harness by splicing into an OEM harness is a pain in the neck!
But several years ago Low Range Off-Road embarked upon the goal of creating the best purpose made wiring harness kit for Toyota E-Locker axle swaps. We wanted an easy to install harness that requires as little modification to the vehicle as possible. After a few revisions we have what is now the Ultimate E-Locker Wiring Harness Kit.
Our harness is made up of OEM grade cross linked insulated wire. We use wire gauges that match the factory harness. Harnesses are 18 feet long and available for both low pinion and high pinion differentials. Please verify the plug shape on your differential to make sure you get the correct harness plug. Some newer low pinion differentials may have high pinion plugs. Harnesses come with either "Front Locker" or "Rear Locker" labels.
Compatible Toyota electric lockers are found in the rear of 1996-2015 Tacomas, 2007-2014 FJ Cruisers, and 1996-2002 4Runners. High pinion front axles can be found on 1993-1997 FJ80 Land Cruisers.
Harness is supplied with (2) 15A fuses: (1) ATO and (1) Mini fuse.
Low Range Ultimate Harnesses can not be used on 2016+ Toyota Tacomas.
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Features:
- Factory style connections for easy installation
- Each wire is sealed at the connector just like OEM
- Fused battery wire
- Weather resistant fuse holder
- OEM gauge and color automotive cross linked wire
- OEM axle breather tube connector built into harness
- Fuse taps included to provide switch Illumination when your lights are turned on
- Ground connection through 1 screw
- Harness is 18' long to reach just about any application
- Harness is supplied with (2) 15A fuses: (1) ATO and (1) Mini fuse
Fits E-Locker differentials on the following vehicles.
- 1996 Toyota Tacoma
- 1997 Toyota Tacoma
- 1998 Toyota Tacoma
- 1999 Toyota Tacoma
- 2000 Toyota Tacoma
- 2001 Toyota Tacoma
- 2002 Toyota Tacoma
- 2003 Toyota Tacoma
- 2004 Toyota Tacoma
- 2005 Toyota Tacoma
- 2006 Toyota Tacoma
- 2007 Toyota Tacoma
- 2008 Toyota Tacoma
- 2009 Toyota Tacoma
- 2010 Toyota Tacoma
- 2011 Toyota Tacoma
- 2012 Toyota Tacoma
- 2013 Toyota Tacoma
- 2014 Toyota Tacoma
- 2015 Toyota Tacoma
- 1996 Toyota 4Runner
- 1997 Toyota 4Runner
- 1998 Toyota 4Runner
- 1999 Toyota 4Runner
- 2000 Toyota 4Runner
- 2007 Toyota FJ Cruiser
- 2008 Toyota FJ Cruiser
- 2009 Toyota FJ Cruiser
- 2010 Toyota FJ Cruiser
- 1993 Toyota FJ-80 Land Cruiser
- 1994 Toyota FJ-80 Land Cruiser
- 1995 Toyota FJ-80 Land Cruiser
- 1996 Toyota FJ-80 Land Cruiser
- 1997 Toyota FJ-80 Land Cruiser
If you have any questions on the use or installation of this product please contact our customer support at (559)-549-6737
To Install:
- Connect both E-locker Harness plugs to differential
- Hook up power wire to battery
- Connect ground wire to a screw under the dashboard
- Using fuse taps, connect illumination wire to a fuse that powered when lights are on
- EASY!!!!
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Please read and review our return and warranty requirement document before sending in products.
Warranty Exclusions
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
- Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, CA 93727.
Ship all products to: - Please place a clearly marked copy of the original invoice inside the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.