Suzuki Samurai and Sidekick Stainless Steel Header

Rating:
97% of 100
$311.09
29 In Stock
SKU
SX-SSH

Suzuki Samurai and Sidekick Stainless Steel Header

Low Range Off-Road's 8-Valve Tri-Y Header is the absolute highest quality header available for 8-Valve Samurais, Sidekicks, and Trackers. This is the last header you will ever need to buy! The brand new TIG welded fully stainless exhaust header is designed for a long service life. A 3/8" thick port matched head flange matches the Suzuki's rectangular exhaust ports while eliminating warps and leaks. The header also features an O2 sensor port at the 3-bolt flange. This header design adds horsepower and increases fuel economy.

OEM Style Header Gasket

Most header kits include a sub-standard exhaust gasket. Low Range Off-Road Tri-Y headers come with an OEM style gasket. Why should you use an OEM Suzuki style header gasket?  Suzuki's header gasket design includes spark plug wire heat shields. Even though spark plug wires are insulated, heat can cause a wire's resistance to raise. Using a gasket without a heat shield can cause ignition problems that may not be easily identified. It is always best to keep the spark plug wires cool. The OEM style header gasket also aligns correctly with exhaust ports and bolt holes.

O2 Sensor Port Located at Collector

Many of our competitors place their O2 sensor bungs high up on the header tubes, often reading only 2 of the 4 cylinders. This terrible design does not correct for fuel issues on the other two cylinders. We place our O2 sensor bungs at the collector to ensure fuel is being monitored efficiently and correctly on all 4 cylinders. This is especially important on 8-valve TBI engines.

The complete kit includes header, upper flange gasket, collector kit, lower flange gasket, and hardware.

Minor welding is required to connect the collector into the factory exhaust system.

NOTE: This header is not smog legal in California and is for off-road use only in California. For all other states, check all applicable laws before ordering.

⚠ WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

  • Manufactured by one of the best header manufacturers in the world.
  • Every tube is CNC Mandrel bent to ensure maximum flow from each header pipe.
  • OEM Style Header Gasket 
  • Squared at header flange to match head port
  • EGR Passage tube welded into header.
  • O2 Sensor Port located at lower collector


1989-1995 Suzuki Sidekick 1.3L/1.6L (8V Engines Only)


1989 Suzuki Sidekick
1990 Suzuki Sidekick
1991 Suzuki Sidekick
1992 Suzuki Sidekick
1993 Suzuki Sidekick
1994 Suzuki Sidekick
1995 Suzuki Sidekick

1986-1995 Suzuki Samurai 1.3L/1.6L (8V Engines Only)


1986 Suzuki Samurai
1987 Suzuki Samurai
1988 Suzuki Samurai
1990 Suzuki Samurai
1990 Suzuki Samurai
1991 Suzuki Samurai
1992 Suzuki Samurai
1993 Suzuki Samurai
1994 Suzuki Samurai
1995 Suzuki Samurai

1989-1995 Geo Tracker 1.3L/1.6L (8V Engines Only)


1989 Geo Tracker
1990 Geo Tracker
1991 Geo Tracker
1992 Geo Tracker
1993 Geo Tracker
1994 Geo Tracker
1995 Geo Tracker

1989-1995 Chevrolet Sidekick 1.3L/1.6L (8V Engines Only)


1989 Chevrolet Tracker
1990 Chevrolet Tracker
1991 Chevrolet Tracker
1992 Chevrolet Tracker
1993 Chevrolet Tracker
1994 Chevrolet Tracker
1995 Chevrolet Tracker

If you have any questions on the use or installation of this product please contact our customer support at (559)-549-6737

All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.

Please read and review our return and warranty requirement document before sending in products.

Warranty Exclusions


Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.

Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.

Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.

All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.

    To begin your warranty claim:
  • Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
  • Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
    Ship all products to:
    ATTN: WARRANTY
    5356 E. Pine Avenue
    Fresno, CA 93727.
  • Please place a clearly marked copy of the original invoice inside the package.
  • Please include a short note stating the problem you are experiencing.

If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.

If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Related products

Copyright © 2023 Low Range Off-Road. All Rights Reserved.