OEM Transfercase Mount (ASSEMBLY)

Rating:
0% of 100
$39.00
100+ In Stock
SKU
STC-MNT

Suzuki Samurai OEM Transfer Case Mount

Looking to replace your stock Suzuki Samurai mounts?  Other mounts on the market are basically solid mounts of bolt-through designs and do nothing but cause problems.  Frame mounts rip off and mounting holes elongate.  If yours show signs of damage, stress, or wear, now is the time to replace them.  It's also a great idea to keep one or two as spares in your toolbox.  Comes with a lock washer and nuts.

Note: Beware of other mounts that are not OEM Suzuki.  They are usually made of inferior materials.  Many manufacturers are too heavy-handed with fillers added to their rubber such as chalk.  This makes the rubber less pliable and more likely to break away from the plates the rubber is bonded to.  If we ever find a better option than the factory ones, by all means, we'll sell it.  Until then, we have yet to find a better "non-solid" mount than those issued by Suzuki.

People frequently ask why their mounts are breaking.  There are a number of potential reasons for this:

  • Your mounts could have failed due to a combination of bent transfer case brackets and the added stresses of off-roading.
  • It could also be that the mounts you're using are just old - rubber subjected to constant hot and cold temperatures can deteriorate over time.
  • They could also have been oil-soaked at some point, causing chemical degradation.
  • It also could be caused by an extreme amount of torque applied to the mounts due to lower gear ratios and higher drivetrain stress.

Low Range Off-Road has had these mounts tested by an independent lab and the results were astonishing. The OEM mounts were much stronger than the aftermarket supplier could produce.

When testing them on their own press the results were equally impressive. The OEM Mount stretched almost 5 inches before breaking!

It's pretty hard to find fault with a part that's probably been in use on most Samurais for 20+ years without a failure.

Sold individually.

Tcase Mount Comparison-image

Watch our test pitting the OEM mounts against aftermarket mounts.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

OEM Replacement

1986-1995 Suzuki Samurai

All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.

Please read and review our return and warranty requirement document before sending in products.

Warranty Exclusions


Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.

Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.

Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.

All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.

    To begin your warranty claim:
  • Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
  • Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
    Ship all products to:
    ATTN: WARRANTY
    5356 E. Pine Avenue
    Fresno, CA 93727.
  • Please place a clearly marked copy of the original invoice inside the package.
  • Please include a short note stating the problem you are experiencing.

If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.

If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Copyright © 2023 Low Range Off-Road. All Rights Reserved.