Tacoma SAS Kit A

Rating:
% of 100
$2,646.60
72 In Stock
SKU
TACOMA SAS KIT A

Tacoma SAS Kit A

Trail-Gear is proud to be the first in the industry to develop a series of Tacoma SAS Kits for 95-04 Tacomas that are complete, user friendly, and affordable. Trail-Gear has a great respect for the Tacoma and the Tacoma market, so we have dedicated our resources to developing a full line of Tacoma products. Every Tacoma component in these kits have been engineered for maximum durability and tested using the most advanced engineering technology in the industry. With our full color, in-depth installation instructions, anyone with minimal mechanical and welding skills can install these kits in one or two weekends.

Trail-Gear offers three different Tacoma SAS kits. We feel that offering a selection allows the customer to pick the kit that is best suited and priced for their unique build. All gussets and frame supports are included, so the Tacoma will be much stronger when you finish than it was from the factory. These kits are built by Tacoma owners, for Tacoma owners. If you have any questions you can call our technical support line with confidence that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation.

This kit consist of the following components:

  • Front Spring hanger
  • All spring and shackle bushings
  • Shock Hoops
  • 5125 Bilstein Shocks (Your size choice)
  • Frame Tube Jigs
  • Frame Tubes
  • Shackle mount Kit
  • Front Frame Reinforcement Plates (With IFS Box Mount Kit Incorporated)
  • Steering shaft
  • Steering couplers
  • Fire wall plate
  • Bump stop kit
  • Heavy Duty Front Leaf Springs

Note: If you have a 3.4L engine, you may need to replace your radiator. See steps 116-120 of the instructions for more information.

Note For SAS Kit A Only: With single case applications, a high clearance t-case crossmember is required to prevent interference with the driveline. Rock Defense Tacoma Single T-Case Crossmember, 120198-1-KIT. Additional oil pan clearance may be required. See our Tacoma SAS Oil Pan Kit for more information.

Note For SAS Kit A, B, and C: You will need the following components to complete your build:

  • (2) Toyota Solid Axle Spindles, 140205-1-KIT
  • (2) Brass Spindle Bushings, 140105-1-KIT
  • (1) Toyota Solid Axle Hubs (Pair), 140448-1-KIT or 140449-1-KIT
  • (2) Aisin Locking Hubs or (1) Creeper Flange Kit, 300468-1-KIT or 140134-1-KIT
  • (1) Super Metal Hub Stud Kit, 300578-1-KIT
  • (1) Super Metal Spindle Stud Kit, 300573-1-KIT
  • (12) Front Wheel Studs, 140392-1-KIT
  • (12) Toyota Lug Nuts, 140080-1-KIT
  • (4) Steering Stop Bolts
  • (1) Set of Wheel Spacers may be required with some rims to clear the brake calipers
Note: Front bumpers that mount to factory bumper mounting locations will not work with this kit.  You will need a bumper that mounts to alternate locations, such as the Rock Defense Tacoma Front Bumper.

⚠ WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

  • 35" tires can be used with this kit with minor trimming of the body. 37" tires can be used with this kit with substantial trimming of the body.
  • All gussets and frame supports are included
  • Most complete kit on the market

Note: If you have a 3.4L engine, you may need to replace your radiator. See steps 116-120 of the instructions for more information.

Note For SAS Kit A Only: With single case applications, a high clearance t-case crossmember is required. Rock Defense™ Tacoma Single T-Case Crossmember, 120198-1-KIT. Additional oil pan clearance may be required. See our Tacoma SAS Oil Pan Kit for more information.

Note For SAS Kit A, B, and C: You will need the following components to complete your build:

  • (2) Toyota Solid Axle Spindles, 140205-1-KIT
  • (2) Brass Spindle Bushings, 140105-1-KIT
  • (1) Toyota Solid Axle Hubs (Pair), 140448-1-KIT or 140449-1-KIT
  • (2) Aisin Locking Hubs or (1) Creeper Flange Kit, 300468-1-KIT or 140134-1-KIT
  • (1) Super Metal Hub Stud Kit, 300578-1-KIT
  • (1) Super Metal Spindle Stud Kit, 300573-1-KIT
  • (12) Front Wheel Studs, 140392-1-KIT
  • (12) Toyota Lug Nuts, 140080-1-KIT
  • (4) Steering Stop Bolts
  • (1) Set of Wheel Spacers may be required with some rims to clear the brake calipers

  • 1995-2004 Toyota Tacoma (All Engines)

All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.

Please read and review our return and warranty requirement document before sending in products.

Warranty Exclusions


Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.

Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.

Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.

All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.

    To begin your warranty claim:
  • Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
  • Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
    Ship all products to:
    ATTN: WARRANTY
    5356 E. Pine Avenue
    Fresno, Ca 93727.
  • Please place a clearly marked copy of the original invoice on the outside of the package.
  • Please include a short note stating the problem you are experiencing.

If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.

If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Copyright © 2023 Low Range Off-Road. All Rights Reserved.