Power Flow 1650psi Power Steering Pump with Serpentine Pulley For 2nd & 3rd Gen Toyota Tacoma
Power Flow 1650psi Power Steering Pump with Serpentine Pulley For 2nd & 3rd Gen Toyota Tacoma
Is your stock Tacoma pump giving out from trying to turn larger tires, or do you need a better pump on your Tacoma to power an LC200 steering rack? Look no further, as we have adapted our popular Power Flow pump for use on the 2nd & 3rd gen Tacoma. With 1,650 psi output, the all-steel body gives the pump exceptional durability. Each pump is bench tested to ensure steady flow under all RPM conditions. The M16 threaded output port will work with your stock Tacoma banjo bolt, and we include new copper banjo bolt washers for a leak-free connection. The included spacer allows the pump to fit in the stock pump bracket. Simply modify the stock pump input hose with a #10 JIC female fitting (not included), install the pump, and you can enjoy improved steering on you Tacoma.
Choose the Stock Rack option for use with a stock Tacoma steering rack. Select the LC200 Rack option if you are using the Land Cruiser LC200 steering rack on your Tacoma.
AVAILABLE OPTIONS:
- TGI-312264 - Power Flow 1650psi Power Steering Pump with Serpentine Pulley For 2nd & 3rd Gen Toyota Tacoma - Stock Steering Rack
- TGI-312299 - Power Flow 1650psi Power Steering Pump with Serpentine Pulley For 2nd & 3rd Gen Toyota Tacoma - LC200 Steering Rack
IMPORTANT NOTES:
- WARNING! The Power Flow™ Power Steering Pump has a maximum rotational speed of 7,000 RPM. Do not drive the pump beyond 7,000 RPM! If you intend to use the pump in a custom build, you will need to calculate the correct pump pulley size to ensure that you never drive the pump beyond 7,000 RPM. Please consult our Power Flow™ Power Steering Pump Pulley Diameter Calculation PDF for the formula and a practical example of how to do this. You may also contact our Technical Support at 1.877.4X4.TOYS or 559-252-4950 or by email at tech@trail-gear.com for additional assistance with your calculations or with any other aspect of your build.
- Use of anything other than a Power Steering Pulley Puller/Installer to install or remove a pulley from your Power Flow™ Power Steering Pump will void the warranty!
- Pump operates in the clockwise configuration.
- Will not work with stock pump input hose. You will need to modify your stock input hose with a #10 JIC female fitting (not included) or have a custom input line made.
- Depending on your exact Tacoma sub-model, you may need a slightly longer serpentine belt (sold separately). Longer belts can be obtained at most auto parts stores.
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- 1,650 PSI output.
- All steel body.
- #10 JIC Low Pressure Input Fitting.
- High Pressure Output Fitting accepts stock Tacoma M16 banjo bolt.
- Endurance Tested at 400°F.
- Steady Flow Across All RPM.
- Each pump is bench tested to ensure quality.
- Black anodized 5.5” effective diameter 7-rib serpentine pulley.
- Flow Rate = 9.4 mL per revolution (17.4 gallons per minute at 7,000 RPM Max. Speed).
- Includes spacer for mounting pump into the stock Tacoma pump bracket.
- Includes copper banjo washers.
- Your choice of porting for stock Tacoma rack or Land Cruiser LC200 steering rack.
| TOYOTA TACOMA - 4.0L V6 Only (2005-2015) 2005 Toyota Tacoma 2006 Toyota Tacoma 2007 Toyota Tacoma 2008 Toyota Tacoma 2009 Toyota Tacoma 2010 Toyota Tacoma 2011 Toyota Tacoma 2012 Toyota Tacoma 2013 Toyota Tacoma 2014 Toyota Tacoma 2015 Toyota Tacoma |
TOYOTA TACOMA - 3.5L V6 Only (2016-2023) 2016 Toyota Tacoma 2017 Toyota Tacoma 2018 Toyota Tacoma 2019 Toyota Tacoma 2020 Toyota Tacoma 2021 Toyota Tacoma 2022 Toyota Tacoma 2023 Toyota Tacoma |
Download the Power Flow Power Steering Pump Install PDF Here
Installation InstructionsFor assistance figuring the correct pump pulley size to ensure that the pump never exceeds 7000 RPM, download the Power Flow Power Steering Pump Pulley Diameter Calculation PDF here
Pulley Diameter InformationAll products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Please read and review our return and warranty requirement document before sending in products.
Warranty Exclusions
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts that are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
Axle/Birfield/CV Joint Warranty Disclaimer
Axle and Birfield/CV joints are warranted by the Trail-Gear Family of Companies for mechanical failures (e.g. breakage) only to the original purchaser. Proof of purchase is required for all warranty claims. Trail-Gear Family of Companies reserves the right to deny any claim if the product is shown to be incorrectly installed or the subject of collateral damage of surrounding components. Trail-Gear Family of Companies is not responsible for any collateral damages to any components caused by or related to a Trail-Gear Family of Companies product. Trail-Gear Family of Companies is not responsible for any shop/labor hours related to the installation or replacement of Trail-Gear Family of Companies product.
All warranty claims are subject to review and acceptance at the sole discretion of the Trail-Gear Family of Companies and may require the return of parts at the customer's expense for warranty review. Parts that are rejected for warranty coverage will be shipped back to the customer at the customer’s expense or scrapped after 10 business days.
For Axle and Birfield/CV joints with Lifetime Warranty, Lifetime Warranty means one-time replacement within the lifetime of originally purchased product only to the original purchaser.
The warranty does not cover the following conditions:
- Normal wear and tear
- Noise
- Twisted shafts
- Twisted splines
- Bent axles
- Stripped threads
- Modification of the product
- Intentional or willful destruction of the product
- Failures from improper installation or storage
- Failures from other than the intended use
- Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer. Ship all products to:
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, CA 93727.
- Please place a clearly marked copy of the original invoice inside the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.
