Track Bar Mount - Outside Frame

These are made to withstand a lot of abuse. Made from 1/4" Thick steel plate and CNC bent, they work great for any do-it-yourselfer trying to mount a trackbar or panhard bar to your frame. 

The length from the bottom of the frame to the center of the first hole is 2" and the second hole is 3.25".

2 Holes so you can fine tune!

Comes with small weld in gusset to make mount stronger. Works great with our 3/4" and 7/8" Rod End/Heim Joint Sets

We recommend making sure your frame can take the abuse once welded. Plating the frame first is recommended to keep from tearing the steel away from your welds.

Universal Fitment.

MADE FOR ONLY 2" WIDE APPLICATIONS (WILL NOT WORK WITH CREEPER JOINTS OR JOHNNY JOINTS)