Suzuki Samurai GM Alternator Conversion Bracket
Looking to run bigger lights, a winch, or even just a better stereo system but still running with that tiny stock alternator? Upgrade to a common larger alternator. With this GM Alternator Conversion Bracket, you can install a GM alternator on either the 1.3L or 1.6L motor. A donor alternator can be found in just about any GM vehicle built from 1973 until 1985 or they're easily found at auto parts stores, alternator repair shops, and junkyards. The models are Delco 10si or 12si. The more factory electrical accessories there are on the donor vehicle, the higher the amperage. This alternator can easily be built to put out 130 amps with parts available at alternator shops.
- Engineered for perfect alignment of the alternator belt
- Bracket is laser-cut from plate steel and hand MIG welded to perfection
- Comes with alternator bracket mounting hardware - all with 10, 12 and 14mm head bolts and nuts just like factory
- High-quality bright zinc plating for corrosion resistance - resists salt and harsh environments
Generally all you have to do to wire up your 2 wire GM alternator is:
1. Cut off the factory Samurai plug.
2. Connect the red wire from the GM alternator pig-tail to the alternators positive output.
3. Connect the white/red wire on the Samurai harness to the white wire from the GM alternator pig-tail.
4. Connect the positive output on the alternator to the battery with a replacement larger-gauge battery cable.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Engineered for perfect alignment of the alternator belt
- Bracket is laser-cut from plate steel and hand MIG welded to perfection
- Comes with alternator bracket mounting hardware - all with 10, 12 and 14mm head bolts and nuts just like factory
- High-quality bright zinc plating for corrosion resistance - resists salt and harsh environments
- 1986 Suzuki Samurai
- 1987 Suzuki Samurai
- 1988 Suzuki Samurai
- 1989 Suzuki Samurai
- 1990 Suzuki Samurai
- 1991 Suzuki Samurai
- 1992 Suzuki Samurai
- 1993 Suzuki Samurai
- 1994 Suzuki Samurai
- 1995 Suzuki Samurai
If you have any questions on the use or installation of this product please contact our customer support at (559)-549-6737
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Please read and review our return and warranty requirement document before sending in products.
Warranty Exclusions
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
- Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, Ca 93727.
Ship all products to: - Please place a clearly marked copy of the original invoice on the outside of the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.
