Samurai Bumpers
We offer a wide variety of bumpers from several different manufacturers. There is something here to suit every need |
 |
|
|
 |
ARB Bull Bar - ARB3424010
ARB is world renowned for their Bull Bar front bumper systems.
The design for the Samurai Bull Bar is no exception. Safety,
protection and function. Mounting to factory front bumper
mounts and for extra rigidity, directly to the front of the
frame. A great part of the bar is the driving light mounting
tabs and tow points. Like everything else ARB does, the powder
coating process is top notch. Each bumper is prepared first
by shot blasting, priming with a zinc chromate, then sprayed
with a strong black powder coat and oven cured providing a
long, lasting maintenance-free finish. The ARB Bull Bar is
also winch ready and made to use with Warn M6000 but may be
easily modified to run many other Warn or T-Max winches.
|
|
|
|
|
ShrockWorks Front
Bumpers
Add one of ShrockWorks popular front winch and non-winch bumpers
to your Samurai for great looks and the ultimate strength.
These bumpers are designed to take maximum off-road abuse.
The lower portion of the bumper is all 1/4" and 3/16"
steel which makes the bumper incredibly strong!. It is CAD
designed and laser cut to ensure a perfect fit on your Sami
and it looks great with or without a winch installed. Tow
points are integrated into the bumper and will accept 3/4"
shackles. The ShrockWorks bumper is also designed to mount
your winch up high to still give you great approach angles.
A receiver hitch option greatly increases versatility. It
can be used with a receiver shackle for an indestructible
tow point, a portable winch, or any of the many receiver mounted
accessories like cargo baskets. New integrated turn signals
are also included. Unlike the Suzuki lenses, these lights
are very cheap to replace if you manage to break one and can
be found at virtually any auto parts store.
The bumper mounts through the four factory frame bolts, then
takes it two steps further. Part 1, two u-bolts clamp the
factory tubular frame cross member to the lower tube on the
bumper. Part 2 is an exclusive frame mounted anti-rotation
bracket. This is a ShrockWorks exclusive which adds serious
beef to the mounting of the winch bumper. It prevents the
bumper from rotating downward under winch load, because just
putting u-bolts around the cross member cannot do this. It
also greatly increases the overall strength of the mount since
it adds two additional frame attachment points.
Std bumper is shipped unpainted, powder coating option available.
Winch bumper accepts most Warn winches up to 9000lbs and most
other companies 8000lb winches.
Works with most aftermarket front suspensions setups except
weld on frame extension versions. Please inquire if you have
any questions about a particular setup. Please let us know
if you have a body lift.
Winch Front Bumper
Price: $385.00
|
|
Powder Coating
Price: $75.00 |
|
1" Body Lift Add-on
Price: $10.00 |
|
2" Body Lift Add-on
Price: $10.00 |
|
Receiver Hitch Add-on
Price: $35.00 |
|
Tow Bar Mount Add-on
Price
: $45.00 |
|
Center Hoop Only
Discount: $-25.00 |
|
No Top Tubing
Discount: $-40.00 |
|
Special orders also taken for no lights or no upper bars and
DIY kits. Call with any questions.
|
|
|
|
|
"Double Tough"
Bumpers
Trail Tough's bumper series are Tough! Designed with a close
fit to provide maximum approach and departure angles. They
are made from .145 wall thickness material with an OD of 1.900
with tight radiuses to provide maximum rock rash protection
and attractive styling. Finished in black powder coating.
Uses factory lighting. Fully bolt on and can be used with
most shackle reverse kits and Missing Link set ups.
Double Tough Stinger Front Bumper w/ Winch Mount
Price: $399.00 |
|
Double Tough Basic Front Bumper
Price: $239.00 |
|
Double Tough Front Bumper w/ Receiver
Price: $259.00 (View) |
|
Double Tough Universal Winch Mount Front Bumper
Price: $299.00 (View) |
|
Double Tough Universal Winch Mount Front Bumper w/Fender/Grill Guard
Price: $379.00 (View) |
|
|
|
|
|
Desert Runner Front Bumper
Made from 1.5in.x .120 hrew tubing with 1.0in.x .120 hrew tube bracing. Our bumper is made for maximum approach angle while still mounting a full-sized winch. Designed to mount a Warn brand 9.5 intergrated solenoid winch our bumper will accept most standard 10x4 foot pattern winches. Bumper mounting is accomplished thru multiple frame mounting bolts and braced for side impacts to provide maximum strength. Our bumper will not work with missing-link suspensions without modifications.
Shipping weight-42lbs 3.0oz
|
|
 |
|
Front Double Tube
Bumper
This bumper offers super protection for the front end of your
Samurai. The bumper features 3" steel tubing and 1 piece
welded construction which makes this bumper extremely tough
and durable. The bumper also has an added grill hoop bar for
extra protection and two light tabs for mounting off road
lights as well. The factory front turn indicator lights bolt
directly to integrated tabs in the bumper design and bumper
as a whole bolts directly to the frame. No drilling required
for installation. Bumper is finished in semi-gloss black powdercoat
and comes complete with all mounting hardware.
Note: May not work with all suspension kits |
|
 |
|
Front Double Tube
Bumper w/ Winch Mount
Finally, a rugged, easy way to mount your winch on the front
of your Samurai. Uses our exclusive mounting system found
on all of our heavy duty winch bumpers. Has all the same features
of our regular tube bumper except it is designed to accommodate
your winch. The bumper can accommodate winches up to 22 inches
wide. Recommended maximum winch size 4000 - 6000 lbs. The
complete bumper kit is finished in semi-gloss black powder
coat for corrosion resistance and comes with full mounting
hardware.
Note: May not work with all suspension kits |
|
 |
|
Front Double Tube
Winch Bumper
This heavy duty bumper is built from 1/4" steel plate
throughout. The winch plate is pre-drilled to accept all Warn
or Ramsey winches up to 9000 pounds. Unlike other designs
out there, you are not limited to the style of winch that
can be used. Stand-up or standard flat style will install
with ease and full access to the winch. The bumper also features
a precision laser cut front fairlead plate that is ready for
your roller fairlead. Our bumpers are the strongest winch
bumper for the Samurai, PERIOD. The bumper allows you to remove
the outer stock bumper mount tube for additional tire clearance
in the front. The lower tube in the bumper is fully welded
and reinforced and allows for the use of a Hi-Lift jack at
any point. The bumper also feature integrated tabs for mounting
factory turning indicators and requires no drilling to install.
Bumper can be use with any CALMINI suspension system and towbar
kit...at the same time! Bumper is finished in semi-gloss powder
coat for excellent corrosion resistance and comes complete
with all mounting hardware.
Note: May not work with all suspension kits. |
|
|
|
Front Plate Winch
Bumpers
These Heavy Duty winch bumper features 1/4" & 3/16"
plate throughout. The bumper has pre-drilled winch mounting
plates and accepts all Warn or Ramsey winches up to 9000lbs.
Strongest bumper and mounting system on the market today.
Allows additional front tire clearance by removing outer stock
bumper mounts. The bumper ends are formed with 3/16"
plate steel and are indestructible, not like wimpy 10ga. sheet
metal used on other bumpers. The outer beams are tapered at
the ends for maximum clearance off road and uses stock turn
indicator lamps. Bumpers are finished in semi-gloss black
powder coat and comes complete with all necessary hardware
for installation. No welding required. Made by Calmini.
Stage 1 has no upper bars or grill guards and is great for
the wheeler looking keep things to a minimum or add their
own style.
Stage 2 adds the upper plates and center cross tube.
Stage 3 starts with the stage one bumper with the addition
of the addition of a more complex grill guard system as well
as integrated tabs for driving lights.
Stage 1
Price: $399.00 |
|
Stage 2
Price: $429.00 |
|
Stage 3
Price: $549.00 |
|
Note: May not work with all suspension kits. |
|
|
|
ZOR Front Winch Ready Rock Crawler Bumpers
Each of these bumpers start with the prefab center section. It has seen many design changes over the last few years including a winch plate and fairlead bracket. This center section was designed to hug the front of the Samurai allowing the most possible clearance when ledge crawling. Built for winches pulling up to 9,000 lbs (some winch brands up to 9,500 lbs).*
If your winch is smaller, you can re-drill and center the winch very easily. There are two sets of slotted holes. They are predrilled off-center using the industry standard mounting pattern and centered to the same pattern allowing complete versatility in your winch installation. The fairlead slot and holes are centered to the vehicle.
You can order just the center section and build from there or choose from 3 different bumper end styles: "Solid Face" Ends (no turn signals), Oval Turn Signal Ends, or Stock Turn Signal Ends. Other options listed in pricing.
Front Rock Crawler Bumper Center Section Only
Price: $149.00 |
|
Front Rock Crawler Bumper with "Solid Face" Ends
Price: $219.00 |
|
Front Rock Crawler Bumper with Oval Turn Signal Ends
Price: $219.00 |
|
Front Rock Crawler Bumper with Stock Turn Signal Ends
Price: $219.00 |
|
Add on HD Class 3 Receiver
Price: $40.00 |
|
Add on 2 D-Rings
Price: $40.00 |
|
|
|
|
|
ZOR "Brute" Front Bumpers
Another great product from ZOR if your not running a winch.
This is another simple bolt on product that will turn heads and give your zuk some muscle against trees and rocks. Fully welded and made with the same procedures and materials as the winch bumpers. If ordered with the class 3 receiver, it is supported by additional thick wall square tubing welded between the uprights. No drilling required to mount.
Brute Center Section Only
Price: $129.00 |
|
Brute Front Bumper with "Solid Face" Ends
Price: $219.00 |
|
Brute Front Bumper with Oval Turn Signal Ends
Price: $219.00 |
|
Brute Front Bumper with Stock Turn Signal Ends
Price: $219.00 |
|
Add on HD Class 3 Receiver
Price: $30.00 |
|
|
|
|
|
ZOR Subspeed Winch Bumper
This bumper looks like the Front Winch Ready Rock Crawler Bumpers but is a lower profile without the normal uprights. Can be ordered in center section only or with the 3 different ends. There are also 2 different Stinger options for the Subspeed as well. The bumper can be purchased with or without a stinger. Stingers are weld on Only.
Subspeed Front Center Section Only
Price: $139.00 |
|
Subspeed Front Bumper with "Solid Face" Ends
Price: $209.00 |
|
Subspeed Front Bumper with Oval Turn Signal Ends
Price: $209.00 |
|
Subspeed Front Bumper with Stock Turn Signal Ends
Price: $209.00 |
|
Add on Single-Bend Stinger
Price: $99.00 |
|
Add on Double-Bend Stinger
Price: $99.00 |
|
Add on 2 D-Rings
Price: $40.00 |
|
|
|
|
|
ZOR Fender Protectors
Superior protection for your Samurai fenders. These fender protectors rings bolt directly to the Front Winch Ready Rock Crawler Bumpers and "Brute" Front Bumpers. Made from 1/4" Steel flat bar that is cnc drilled to tight specifications. Thick wall tubing fully welded with a very tight bend radius. Stainless steel hardware provided.
|
|
|
|
ZOR HD Bumper Mounting
This front bumper bolting system is a must if you plan on towing, yanking on D-rings, or using a winch on your Samurai.
This is a retro fit kit for all ZOR front bumpers. Designed to fit all Samurai frames. Custom machined Grade 8 3/8"-16 bolts, washers, lock washers and nuts with 4 precision (cnc lathe) steel spacers.
|
|
|
|
Oval Lights - Incandescent Bulb and LED
Looking for new lights for your ZOR bumper or a custom built setup? We have what your looking for. Amber colored oval lights are pretty much the standard for front Samurai aftermarket bumpers and we now carry the standard incandescent bulb style as well as the LED style lights. Sold individually and comes with light housing, pigtail, and rubber mounting ring. Other lights also available in our Lighting Page.
Amber Incandescent Bulb Oval Light
Price: Coming Soon
Amber LED Oval Light
Price: Coming Soon
(Note: For LED setups the factory blinker relay may not work right. You may need aftermarket blinker relays to work correctly).
|
|
|
|
|
Stock Replacement Turn Signals
Just what you need to replace that cracked and busted housing you have or if you just want to put new ones in with that new bumper from Low Range.
Sold individually and work on either side.
Complete Front Turn Signal, Driver Side
Price:$39.00 |
|
Complete Front Turn Signal, Passenger Side
Price:$39.00 |
|
|
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
){kind=link}
){kind=link}
){kind=link}
